QUICK ANSWER
Jacksonville paver installation commonly falls around $15–$30 per square foot.
That broad 2026 planning range appears across current Jacksonville contractor guides for professionally installed patios and general paver work. It is not a PPM quote, and some straightforward work may fall outside it while premium stone, difficult access, major demolition, drainage, steps, coping or specialty features can move beyond it.
Reviewed by Pavers Plus More ·
Paver project planning examples
| Planning example | Illustrative installed range | What changes it |
|---|---|---|
| 400 sq. ft. patio | $6,000–$12,000 | Access, demolition, layout, paver selection and borders |
| 800 sq. ft. pool deck area | $12,000–$24,000 | Coping, deck removal, drainage, stone choice and pool details |
| 1,000 sq. ft. driveway | $15,000–$30,000 | Concrete removal, base, vehicle load, street transition and pattern |
These examples multiply area by a broad local planning range. They are not offers or guaranteed prices. A site specific written estimate is necessary.
Seven factors that move the price
- Demolition: removing concrete, old pavers, decking or unsuitable base adds labor, equipment and disposal.
- Access: narrow gates, screened enclosures and hand carried materials slow production.
- Base and grading: excavation depth, soil conditions, compaction and elevation corrections affect everything above.
- Drainage: drains, connections, slope correction and water management coordination can be essential scope items.
- Materials: standard concrete pavers generally cost less than premium formats, porcelain or natural stone.
- Details: borders, curves, inlays, steps, walls and coping require more cuts and craftsmanship.
- Project size: small jobs still carry mobilization, equipment and delivery costs, so their per square foot rate can be higher.
How to compare two paver estimates
Make sure the proposals describe the same square footage, demolition, excavation, base material and depth, compaction, bedding material, paver manufacturer and series, pattern, border, edge restraint, drainage assumptions, joint sand, cleanup and warranty. A low number that omits important preparation is not the same scope.
Build a realistic budget before choosing materials
Measure the usable area, list demolition and access concerns, note drainage problems and separate essential features from future upgrades. Then reserve room for unknown conditions or changes. PPM can help organize the project around how the space will be used and identify which design choices provide the most value.
Jacksonville paver cost questions
How much does paver installation cost in Jacksonville?
A broad 2026 planning range for professionally installed paver work is about $15–$30 per square foot. It is not a PPM quote. Demolition, access, base preparation, drainage, materials and specialty details can move a project below or above that range.
Why can two paver projects of the same size cost different amounts?
Square footage is only one factor. Removal of the existing surface, access, excavation, soil and base needs, drainage, material selection, borders, coping, steps and utility coordination can make two equally sized projects very different scopes.
Can PPM provide a final price from square footage alone?
No. Square footage can support early budgeting, but a final estimate needs the project location, existing conditions, access, elevations, drainage, materials and the exact work to be included.
What should homeowners compare between two paver estimates?
Compare demolition, excavation, base material and depth, compaction, bedding, drainage assumptions, paver series and color, pattern, borders, edge restraint, joint sand, cleanup, warranty and how changes are approved.