Inspect
Review the paver type, staining, joints, borders, low areas, existing coatings and any movement before choosing products or methods.

Care based on condition
Cleaning, repair, re-sanding and sealing solve different problems. PPM first reviews the paver surface, joints, borders, drainage and any existing coating, then recommends only the maintenance steps that fit the condition of the area.
Request a paver cleaning & sealing estimate →
PLANNED FOR YOUR PROPERTY
PPM begins by looking at the surface, joints, borders, drainage and any existing coating. Dirt, fading, joint loss, settlement and trapped moisture are different conditions and should not receive the same automatic treatment.
Cleaning may improve suitable staining, repairs correct movement or failed support, re-sanding restores joints, and sealing changes the surface. The written scope should identify which steps are recommended, in what order and why.
THE PPM PROCESS
Review the paver type, staining, joints, borders, low areas, existing coatings and any movement before choosing products or methods.
Identify what needs cleaning, repair or joint attention and whether sealing is appropriate. One step should not be presented as a substitute for another.
Confirm preparation, repairs, drying conditions, product compatibility and aftercare in the written scope before work begins.
Strong sun, heavy rain, humidity, shade and irrigation can affect appearance, joint condition and moisture. Wet-area traction and drainage deserve special attention, and an existing coating must be identified before another sealer is considered. Cobble Loc is evaluated only for compatible concrete pavers after the surface and preparation requirements are reviewed.
A useful proposal identifies the area, surface condition, cleaning method, stain limitations, repairs, joint material, drying requirements, sealer product when applicable, number of coats, traction considerations, protection and aftercare. The final recommendation should follow the manufacturer’s instructions and the actual condition of the property.
COMMON QUESTIONS
No. Sealing is a property- and product-specific choice, not an automatic requirement. The paver type, condition, existing coatings, moisture, desired appearance, maintenance expectations and wet-area traction should be reviewed first.
Yes, when settlement, loose edges, drainage problems or significant joint loss are present. Coating the surface does not correct movement or water problems underneath it.
PPM may recommend Cobble Loc only after confirming that the surface is a compatible concrete paver system and reviewing preparation, existing coatings, moisture and traction needs. Manufacturer instructions and the written project scope control the application.
Share the project type, approximate area, location and a few photos if available. PPM will discuss your goals, existing conditions and the most useful next step before an on-site consultation is arranged.
PPM serves Jacksonville, Duval County and nearby Northeast Florida communities including the Beaches, Ponte Vedra, St. Johns, Orange Park and Fleming Island.
AREAS WE SERVE
Available for active-duty military, veterans, law enforcement and firefighters. Ask PPM for project eligibility and details.
View discount details →YOUR TRANSFORMATION STARTS HERE